News
Electro-Metrics Introduces The New EM-6853 Ultra-Wideband Passive Omni-Directionial Antenna 300 MHz - 40 GHz
Johnstown, NY - January 31, 2011 - Electro-Metrics has introduced the all-new EM-6853 Ultra-Wideband Passive Omni-Directional Antenna. This unique ultra-wideband antenna has broad frequency coverage from below 300 MHz to well above 40 GHz.With nominal gains of 0 dBi or higher over 99.5% of the antenna frequency coverage range, this antenna is the perfect device for receiving, monitoring, SIGINT, or any other application where a small, rugged, high performance passive ceiling mount antenna is required.
This antenna offers the uncompromising performance you've come to expect from Electro-Metrics. A state-of-the-art design provides the antenna characteristics you need, unmatched by others in the community.
The EM-6853 Ultra-Wideband Passive Omni-Directional Antenna is designed and manufactured in Johnstown, NY USA.
Electro-Metrics Corp. is a leading designer, producer and integrator of antennas, sensors and systems for broadband RF communications and testing.
Additional information about the Company and its services is available at www.electro-metrics.com, or contact:
Valerie J. Zabo
Marketing Services Coordinator
Phone: 518-762-2600
Email: vzabo@emihq.com
Electro-Metrics Introduces The New EM-6857 "Club" 20 MHz - 40 GHz Omni-Directional Antenna
Johnstown, NY - June 22, 2010 - Electro-Metrics is proud to introduce the EM-6857 ultra wide band, omni-directional, passive antenna. The EM-6857 performs over a frequency range from 20 MHz to 40 GHz and is the ideal antenna for TSCM and many SIGINT applications. The light 2.5 pound, 4.5 inch diameter, 17.5 inch long antenna reduces the number of antennas required to cover the spectrum and eliminates the need for batteries that a broadband active antenna would require. It is perfect for applications demanding rugged design and where size, weight and system configuration complexity must be kept to a minimum.The exceptionally broad and consistent frequency response with nominal gains above 0 dBi from 200 MHz to 40 GHz, is the result of the continuing development of Electro-Metrics proprietary technology. It is also the ideal antenna to be used with the Electro-Metrics new 40 GHz EM-2140 block down converter, that extends the frequency range coverage of receivers limited to an upper frequency of 18 to 21 GHz. The EM-6857 is supplied with a white radome and a tripod-mounting bracket in its standard configuration. Available options include a color change to a flat black finish, and a vehicle "roof rack" mount.
Electro-Metrics designs antennas and related RF equipment used in numerous government and industrial applications including EMI, TSCM, and SIGINT. An innovator in specialized antennas and kits, Electro-Metrics is the choice for optimal mission specific solutions. All Electro-Metrics products are proudly designed and manufactured in the USA.
Electro-Metrics Corp. is a leading designer, producer and integrator of antennas, sensors and systems for broadband RF communications and testing.
Additional information about the Company and its services is available at www.electro-metrics.com, or contact:
Valerie J. Zabo
Marketing Services Coordinator
Phone: 518-762-2600
Email: vzabo@emihq.com
Electro-Metrics introduces a new line of RF coaxial port switches
Johnstown, NY January 2010 - Electro-Metrics is proud to introduce a new line of coaxial port switches designed to operate in the micro and millimeter wave frequency ranges. Featuring industry leading performance in insertion loss, switching speeds, and interfacing capabilities, this new line of coaxial port switches have been designed for the most rigorous of applications.Whether your requirement is for low insertion loss, switching speeds of less than 1 microsecond, even battery operation, Electro-Metrics has a coaxial switching unit to meet your needs. Available with a variety of interfaces, including USB, USB over fiber (up to 1.5 kilometers), Ethernet, or RS-232, control of these switches can easily be integrated into your system software.
If your need is for a simple transfer switch, or switching between eight input ports in less than a microsecond, contact Electro-Metrics today and let us help you with a solution to your signal path dilemma. Electro-Metrics coaxial port switches are proudly designed and manufactured in the USA.
Electro-Metrics Corp. is a leading designer, producer and integrator of antennas, sensors and systems for broadband RF communications and testing.
Additional information about the Company and its services is available at www.electro-metrics.com, or contact:
Valerie J. Zabo
Marketing Services Coordinator
Phone: 518-762-2600
Email: vzabo@emihq.com
John A. Fallone appointed as President and Chief Executive Officer
Johnstown, NY January, 2010 Electro-Metrics Corporation a manufacturer of communications equipment and supplier of services to the energy industry announced the appointment of John A. Fallone as President and Chief Executive Officer. Mr. Fallone will succeed Kenneth W. Bach who has been president of Electro-Metrics since February 1990. Mr. Bach will move to the position of Chairman of the Board and will remain active in the corporation as Chief Financial Officer and as a consultant in marketing and product development.Mr. Fallone is a Mechanical Engineer and graduate of Clarkson University and has held senior and chief executive positions with several corporations involved in engineering and manufacturing operations. Among his executive experience, Mr. Fallone served as President and CEO of Organichem Corporation which he founded through a management buyout.
Mr. Bach said: "John brings a wealth of experience and new vitality to the top management position of Electro-Metrics. I believe he will rapidly build on the past success of the corporation in both of the organization's areas of effort."
Paul A. Sikora, Vice President and all other senior managers of Electro-Metrics will remain with the corporation.
Electro-Metrics Corp. is a leading designer, producer and integrator of antennas, sensors and systems for broadband RF communications and testing.
Additional information about the Company and its services is available at www.electro-metrics.com, or contact:
Valerie J. Zabo
Marketing Services Coordinator
Phone: 518-762-2600
Email: vzabo@emihq.com
Product Sales and Service Bulletin
October 1, 2009 - Effective immediately all sales and service for the region covering Washington, DC, the states of Maryland, Virginia and Delaware will be provided directly from Electro-Metrics Corporation's headquarters in Johnstown, NY. Customers requiring assistance should contact Electro-Metrics' sales and customer service department representatives or management listed below. Service and product warranty support for any equipment manufactured by Electro-Metrics will be provided without regard to the source or supplier of the equipment.Since 1963 Electro-Metrics has taken pride in a reputation for support to all users of our equipment. It is our policy that we will support any piece of equipment regardless of age as long as we can acquire components. If any customer has questions concerning support for any item of Electro-Metrics manufacture, they should contact the factory immediately. We will welcome their inquiry.
Points of contact:
Michael A. DiCaprio, Manager, Sales Administration
Wayne A. Mound, Head, Customer Services
Paul A. Sikora, Vice President, Manager Engineering
John A Fallone, President & CEO
Electro-Metrics Corp. is a leading designer, producer and integrator of antennas, sensors and systems for broadband RF communications and testing.
Additional information about the Company and its services is available at www.electro-metrics.com, or contact:
Valerie J. Zabo
Marketing Services Coordinator
Phone: 518-762-2600
Email: vzabo@emihq.com